UET Aggregate Calculator (ECAT Merit)
Work out your UET Lahore aggregate from matric, FSc Part I and ECAT marks.
How the UET aggregate is calculated
UET Lahore ranks applicants to its ECAT-based programmes by an aggregate of three results. Under the Fall 2026 prospectus the weights are 17% matric, 50% intermediate Part I and 33% ECAT. The ECAT (Engineering College Admission Test) has 100 questions and is marked out of 400.
Formula: aggregate = (matric % × 0.17) + (FSc Part I % × 0.50) + (ECAT % × 0.33).
| Part | Weight | Marks used |
|---|---|---|
| Matric (SSC) | 17% | Obtained ÷ total |
| Intermediate Part I (FSc) | 50% | First-year marks ÷ first-year total |
| ECAT | 33% | Score ÷ 400 |
Worked example
Matric 950 out of 1,100, FSc Part I 470 out of 550 and an ECAT score of 220 out of 400:
- Matric: 950 ÷ 1,100 × 17 = 14.68
- Intermediate: 470 ÷ 550 × 50 = 42.73
- ECAT: 220 ÷ 400 × 33 = 18.15
- Aggregate: 75.56%
How your ECAT score changes the aggregate
| ECAT score | 70% in Matric and Inter | 80% in Matric and Inter | 90% in Matric and Inter |
|---|---|---|---|
| 50% (200 out of 400) | 63.40% | 70.10% | 76.80% |
| 60% (240 out of 400) | 66.70% | 73.40% | 80.10% |
| 70% (280 out of 400) | 70.00% | 76.70% | 83.40% |
| 80% (320 out of 400) | 73.30% | 80.00% | 86.70% |
| 90% (360 out of 400) | 76.60% | 83.30% | 90.00% |
Because intermediate carries half of the weight, first-year marks matter more at UET than at most other universities. Every extra 10 ECAT marks adds about 0.83 points.
Things to know
- Older formulas: many websites still show earlier UET formulas, such as 70% FSc and 30% ECAT. If your result differs from another calculator, check which weights it uses.
- Minimum marks: UET sets minimum intermediate marks for eligibility, and a minimum aggregate, in its prospectus.
- Other universities: several public engineering universities in Punjab accept the ECAT but may apply their own weights.
- Non-ECAT programmes: these follow a different merit method.
O Level and A Level students
Grades cannot be entered directly. Get your equivalence from IBCC first, then enter the equivalence marks and total in the Matric and Intermediate boxes.
What this estimate leaves out
- Closing merit: your aggregate only tells you where you stand. Whether it is enough depends on the closing merit of the programme and campus, which changes every year.
- Quotas and reserved seats: these are handled outside this formula.
- Rule changes: universities can change their weights between admission cycles. Confirm the current formula on the university’s admissions page before you rely on the result.
Formula last reviewed in November 2026. This is an estimate and not an admission decision.
How to cite this page
CalcPulse. (2026). UET Aggregate Calculator. https://calcpulse.com/uet-aggregate-calculator-pakistan/
Sources
The rates and rules on this page were checked against these official sources.
Frequently asked questions
How do I calculate my UET aggregate?
Multiply your matric percentage by 0.17, your FSc Part I percentage by 0.50 and your ECAT percentage by 0.33, then add them.
What is the UET aggregate formula?
For ECAT-based programmes under the Fall 2026 prospectus it is 17% matric, 50% intermediate Part I and 33% ECAT.
What are the total marks of the ECAT?
The ECAT has 100 multiple choice questions and is marked out of 400.
Does UET use FSc Part I or Part II marks?
The merit formula uses first-year (Part I) intermediate marks.
How much does 10 ECAT marks add to my aggregate?
With a 33% weight and 400 total marks, 10 ECAT marks add about 0.83 points to the aggregate.
Why does another calculator give a different UET aggregate?
It may use an older formula. UET has changed its weights over the years, so check which weights the calculator applies.
Last reviewed and updated by the CalcPulse team