T-Table: t-Distribution Critical Values

Look up t critical values, with the full t-table and a calculator.

What the t-table shows

The t-table lists critical values of Student’s t-distribution for each number of degrees of freedom (df). Each column is a one-tailed probability. For a two-tailed test, double the column’s value to get the matching significance level: the 0.025 column corresponds to a two-tailed alpha of 0.05. The calculator tabs can find the exact critical value for any df and alpha, and the probability for any t-statistic.

How to read the t-table

  1. Work out the degrees of freedom. For a one-sample or paired t-test, df = n − 1. For a two-sample pooled t-test, df = n₁ + n₂ − 2.
  2. Choose your alpha and whether the test is one-tailed or two-tailed.
  3. Read the cell where the row (df) and the column (one-tailed probability) meet.

For example, with 10 degrees of freedom and a two-tailed alpha of 0.05 (the 0.025 column), the critical value is 2.228. If your t-statistic is larger than 2.228 or smaller than −2.228, the result is significant at the 5% level.

t-table of critical values (one-tailed probability in the columns)
Critical values of Student’s t-distribution
df 0.1 0.05 0.025 0.01 0.005 0.001 0.0005
1 3.078 6.314 12.706 31.821 63.657 318.309 636.619
2 1.886 2.920 4.303 6.965 9.925 22.327 31.599
3 1.638 2.353 3.182 4.541 5.841 10.215 12.924
4 1.533 2.132 2.776 3.747 4.604 7.173 8.610
5 1.476 2.015 2.571 3.365 4.032 5.893 6.869
6 1.440 1.943 2.447 3.143 3.707 5.208 5.959
7 1.415 1.895 2.365 2.998 3.499 4.785 5.408
8 1.397 1.860 2.306 2.896 3.355 4.501 5.041
9 1.383 1.833 2.262 2.821 3.250 4.297 4.781
10 1.372 1.812 2.228 2.764 3.169 4.144 4.587
11 1.363 1.796 2.201 2.718 3.106 4.025 4.437
12 1.356 1.782 2.179 2.681 3.055 3.930 4.318
13 1.350 1.771 2.160 2.650 3.012 3.852 4.221
14 1.345 1.761 2.145 2.624 2.977 3.787 4.140
15 1.341 1.753 2.131 2.602 2.947 3.733 4.073
16 1.337 1.746 2.120 2.583 2.921 3.686 4.015
17 1.333 1.740 2.110 2.567 2.898 3.646 3.965
18 1.330 1.734 2.101 2.552 2.878 3.610 3.922
19 1.328 1.729 2.093 2.539 2.861 3.579 3.883
20 1.325 1.725 2.086 2.528 2.845 3.552 3.850
21 1.323 1.721 2.080 2.518 2.831 3.527 3.819
22 1.321 1.717 2.074 2.508 2.819 3.505 3.792
23 1.319 1.714 2.069 2.500 2.807 3.485 3.768
24 1.318 1.711 2.064 2.492 2.797 3.467 3.745
25 1.316 1.708 2.060 2.485 2.787 3.450 3.725
26 1.315 1.706 2.056 2.479 2.779 3.435 3.707
27 1.314 1.703 2.052 2.473 2.771 3.421 3.690
28 1.313 1.701 2.048 2.467 2.763 3.408 3.674
29 1.311 1.699 2.045 2.462 2.756 3.396 3.659
30 1.310 1.697 2.042 2.457 2.750 3.385 3.646
40 1.303 1.684 2.021 2.423 2.704 3.307 3.551
50 1.299 1.676 2.009 2.403 2.678 3.261 3.496
60 1.296 1.671 2.000 2.390 2.660 3.232 3.460
80 1.292 1.664 1.990 2.374 2.639 3.195 3.416
100 1.290 1.660 1.984 2.364 2.626 3.174 3.390
120 1.289 1.658 1.980 2.358 2.617 3.160 3.373
∞ 1.282 1.645 1.960 2.326 2.576 3.090 3.291

As df grows, the t-distribution approaches the standard normal, and the last row (∞) shows the z critical values.

How to cite this page

CalcPulse. (2026). T-Table: t-Distribution Critical Values. https://calcpulse.com/t-table/

Frequently asked questions

How do I use a t-table?

Find your degrees of freedom in the left column and your one-tailed probability across the top. The cell is the critical t value.

What is the t critical value for 10 degrees of freedom at 0.05?

2.228 for a two-tailed test, and 1.812 for a one-tailed test.

How do I find degrees of freedom?

For one sample or paired data, it is n − 1. For two independent samples with pooled variance, it is n₁ + n₂ − 2.

What is the difference between the z-table and the t-table?

The t-table is used when the population standard deviation is unknown and estimated from the sample. It has heavier tails, especially for small samples.

Why does the last row say infinity?

With infinite degrees of freedom the t-distribution becomes the standard normal distribution, so the values equal the z critical values.

Last reviewed and updated by the CalcPulse team